Datasheet4U Logo Datasheet4U.com

NCV7422 - LIN Transceiver

General Description

Local Interconnect Network (LIN) protocol.

It allows interfacing of two independent LIN physical buses and the LIN protocol controllers.

4, LIN2.2a, LIN2.2, LIN2.1, LIN 2.0 and SAEJ2602 standard

Key Features

  • DFN.
  • 14 Green Package (Pb.
  • Free) LIN.
  • Bus Transceiver.
  • Compliant to ISO 17987.
  • 4 (Backwards Compatible to LIN Specification rev. 2.x, 1.3) and SAE J2602.
  • Bus Voltage ±42 V.
  • Transmission Rate 1 kbps to 20 kbps.
  • TxD Timeout Function.
  • Integrated Slope Control Protection.
  • Thermal Shutdown.
  • Undervoltage Detection.
  • Bus Pins Protected Against Transients in an Automotive Environment Modes.

📥 Download Datasheet

Datasheet Details

Part number NCV7422
Manufacturer onsemi
File Size 284.60 KB
Description LIN Transceiver
Datasheet download datasheet NCV7422 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCV7424 Four Channel LIN Transceiver ON Semiconducto
NCV7410 Automotive Ethernet Transceiver onsemi
NCV70628 Micro-stepping Motor Driver onsemi
NCV7383 Transceiver ON Semiconducto
NCV7518 Hex Low side MOSFET Pre driver ON Semiconducto

Other Datasheets by onsemi

Part Number Description
NCV7420 LIN Transceiver
NCV7425 LIN Transceiver
NCV7428 System Basis Chip
NCV7430 Automotive LIN RGB LED Driver
NCV7441 Dual High Speed Low PowerCAN Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LIN Transceiver, Dual NCV7422 Description The NCV7422 is a two channel physical layer device using the Local Interconnect Network (LIN) protocol. It allows interfacing of two independent LIN physical buses and the LIN protocol controllers. The device is compliant to ISO 17987−4, LIN2.2a, LIN2.2, LIN2.1, LIN 2.0 and SAEJ2602 standards. The NCV7422 LIN device is a member of the in−vehicle networking (IVN) transceiver family. The LIN bus is designed to communicate low−rate data from control devices such as door locks, mirrors, car seats and sunroofs at the lowest possible cost. The bus is designed to eliminate as much wiring as possible and is implemented using a single wire in each node.